INTEGRAL 900 is the most complete and best performing antifriction treatment on the market. Its advanced formula enhances the quality and performance of mineral and synthetic motor oils.
The INTEGRAL 900 antifriction treatment is formulated with high quality components. When added to oil, it reduces friction and prevents start-up wear, most notably in cold weather. INTEGRAL 900 adheres to surfaces thereby reducing metal on metal friction. This contributes to the restoration of the original engine power, the improvement of engine performance as well as fuel economy for both gasoline and diesel.
INTEGRAL 900 is a safe product due in part to the fact that it does not contain any chlorine or Teflon: it prevents filter clogging and provides exceptional resistance to contaminants such as water, gas and antifreeze. Thus, INTEGRAL 900 maintains oil cleanliness and extends its useful life thereby requiring less frequent oil changes.
Use INTEGRAL 900 in all 4-stroke engines, such as cars, vans, small trucks, boats, etc., whether gasoline or diesel fueled.
The INTEGRAL 900 antifriction treatment is compatible with all mineral and synthetic oils.
After the first 5000 km, add INTEGRAL 900 to motor oil with each oil change. For maximum efficiency, add to new oil and change filter. A 350 ml bottle of will treat up to 5 L of oil. Add between 7% and 10% of INTEGRAL 900 of oil pan capacity. In such cases, INTEGRAL 900 can also be used (see INTEGRAL 900 specification sheet). Avoid overflowing. For motors with between 40 000 km and 80 000 km, can use MOTOR CLEANER before using INTEGRAL 900.
INTEGRAL 900 is not intended to repair mechanical defects.
350 ml, 1 Lt, 5 Lt, 19 Lt, 200 Lt
Characteristics |
Test method |
Typical values |
Flash point |
D92 |
216°C |
Specific gravity at 15°C |
D4052 |
0.93 gr/cm3 |
Viscosity at 40°C |
D445 |
188 cSt |
Viscosity at 100°C |
D445 |
21.7 cSt |
Viscosity index |
D2270 |
138 |